Livraison internationale offerte dès €300.
Bonjour Soir

The atelier sits on the third floor of the Prada headquarters in Milan, just off Via Fogazzaro

Jean-Claude Beaumont··6 min

The atelier sits on the third floor of the Prada headquarters in Milan, just off Via Fogazzaro. Afternoon light angles through the high windows. At one table, a woman named Carla Beretta is hand-stitching the interior pocket of what will become a Galleria bag — the structured, saffiano-leather tote that has anchored the maison's leather-goods line since 2007. She works without a pattern in front of her. The seam allowance, the placement of the zip tape, the tension in the thread: all of it committed to memory after sixteen years on the same model.

Beretta is not a name you will find in a Prada campaign. Nor will you encounter her in the press notes that accompany each runway show. Yet she is one of roughly forty artisans in the Scandicci workshop outside Florence — Prada's primary leather facility — who produce the house's bags by hand. Each Galleria requires between eight and ten hours of bench time. Beretta can complete one and a half per day, depending on the leather. Saffiano, with its crosshatch embossing, is more forgiving than the soft calf used in the inside lining. She prefers working with the tougher material. It does not lie.

The Scandicci Atelier

Prada acquired the Scandicci facility in 1999, as part of a broader consolidation of its leather production. Before that, much of the work was contracted to independent ateliers scattered across Tuscany, a common practice among Italian houses in the 1980s and early 1990s. The shift to in-house production allowed the maison to control quality at a granular level — stitch count, edge finish, the angle at which a handle is set into the body of a bag. It also meant training a generation of artisans in techniques specific to Prada's design language.

Take the saffiano treatment itself. The leather is embossed under heat and pressure, creating a texture that resists scratches and water. It was originally developed by Mario Prada in 1913, then largely abandoned by the house until Miuccia Prada revived it in the mid-1980s. The process requires a precise calibration of temperature and dwell time; too much heat and the leather stiffens, too little and the pattern does not hold. At Scandicci, that calibration is managed by a single technician, Luca Fabbri, who has been with the house since 2001. He adjusts the press settings by hand, checking each hide as it comes off the line.

Fabbri trained originally as a shoemaker in Vigevano, a town north of Milan with a centuries-old tradition in footwear. He joined Prada during a period when the company was expanding its accessories division and needed staff who understood leather as a structural material, not merely a decorative one. His background in shoe construction — where a millimetre of error in the lasting process can render a pair unwearable — translates directly to bag-making. A handle that sits even slightly off-centre throws the weight distribution. A customer may not articulate the problem, but she will feel it.

The Galleria Line

The Galleria itself was designed in response to a specific gap in the market. By the mid-2000s, Prada's nylon bags — the Vela backpack, the various iterations of the tessuto tote — had become ubiquitous, but the house lacked a definitive leather carryall. The Galleria was conceived as a day bag that could move between professional and social contexts without announcing itself. Structured but not rigid. Capacious but not shapeless. The interior is lined in grosgrain, a detail borrowed from the house's archive of 1960s travel cases.

The bag is assembled in stages. First, the saffiano panels are cut on a hydraulic press, using steel dies that are replaced every six months to maintain a clean edge. The panels then move to the stitching stations, where artisans like Beretta attach the lining, set the pockets, and install the zip. The handles are stitched separately and affixed last, a process that requires the bag to be turned inside out, stitched, then turned back. It is a technique that conceals the raw edges of the leather and gives the handle a rolled, finished appearance.

Each artisan works on a single bag from start to finish. There is no assembly line in the traditional sense. Beretta will cut, stitch, and finish the same Galleria over the course of a day and a half, signing her initials on a small leather tag inside the zip pocket before the bag is sent to quality control. The tag is not visible to the customer. It exists as an internal record, a way for the house to trace any defect back to the bench where it originated.

The Métiers

Prada does not own its leather tanneries, a point of distinction from houses like Hermès, which controls much of its supply chain from hide to finished product. Instead, the maison works with a network of tanneries in Tuscany and Veneto, some of which have been suppliers for three generations. The saffiano calfskin comes primarily from Conceria Incas, a tannery in Santa Croce sull'Arno that has processed leather for Prada since the 1970s. The relationship is close enough that Prada's design team will visit the tannery during the development phase of a new bag, testing different weights and finishes of leather against the intended structure.

This is not unusual in the Italian luxury sector, where the line between house and supplier is often porous. What distinguishes Prada is the degree of technical specificity it demands. A tannery working for the maison must be able to produce saffiano in twenty-three colours per season, each matched to a Pantone reference provided by the design studio in Milan. The leather must also meet benchmarks for tensile strength and flexibility — measurements that are tested in Prada's own laboratory before the hides are approved for production.

At Scandicci, the artisans are trained to recognize these qualities by touch. Beretta can assess a piece of saffiano by running her thumb along the grain. If the embossing feels shallow, the leather will not hold its shape over time. If it feels too pronounced, the surface will crack at the stress points — typically the corners and the base of the handles. She returns roughly five per cent of the leather she is given, a rate the house considers acceptable.

The Question of Scale

Prada produces approximately 400,000 leather bags per year, a figure that includes everything from the Galleria to seasonal styles that may appear in only one collection. The Scandicci atelier accounts for a fraction of that output — perhaps 30,000 units, concentrated on the house's core models. The remainder is produced in partner ateliers across Italy and, increasingly, in Romania, where Prada opened a facility in 2018.

The Romanian operation has been a point of tension within the company. Labour costs in Romania are roughly half what they are in Italy, and the move was presented internally as a way to maintain margins without raising prices. But the artisans at Scandicci view it differently. They argue that the techniques required to produce a Prada bag — the particular way the lining is set, the hand-finishing of the edges — cannot be taught quickly. Beretta herself spent two years in training before she was permitted to work on a Galleria unsupervised.

Whether the Romanian facility can match the output of Scandicci remains an open question. The bags produced there are subject to the same quality-control protocols, but the atelier is younger, the staff less experienced. For now, the core collection — the Galleria, the Cahier, the Cleo — remains anchored in Italy.

What Remains

On a recent afternoon, Beretta was working on a custom order, a Galleria in a shade of green that does not appear in the current collection. Custom orders represent less than two per cent of Prada's leather-goods business, but they are handled with the same care as the mainline product. The green in question required a special dye lot, approved by the design studio and produced in a single batch at the tannery. Beretta will complete the bag over three days, working in intervals to allow the leather to rest between stages of construction.

She does not expect her name to appear anywhere in connection with the finished piece. That is not how the system works. But the bag will carry her initials, tucked inside the zip pocket, visible only if someone knows to look. It is a small signature, easy to miss. And perhaps that is the point. The work is there, whether or not it is seen.