Livraison internationale offerte dès €300.
Bonjour Soir

The toile hangs crooked on the stand

Marcus Wright··5 min

The toile hangs crooked on the stand. Sarah Burton adjusts the shoulder, pins the sleeve head again, steps back. Around her, three pattern cutters lean in. One has been with the house since Lee McQueen ran fittings in Hoxton. Another joined after the Plato's Atlantis show. The third is twenty-four and learned her trade at Savile Row Bespoke, where they still teach you to true a sleeve by eye.

This is the part that doesn't make the runway film.

Alexander McQueen built its reputation on spectacle—the hologram, the spray-paint robots, the glass box filled with moths. But those moments required cutters who could engineer a bodice to survive a model being doused in paint, patternmakers who understood how to distribute weight across tulle so it moved like water, embroiderers who could fix beading to silk without the fabric puckering under stage lights. The names rarely surface. The work always does.

The ones who stayed

Simon Ungless taught McQueen to print at Central Saint Martins. He is usually remembered for the collaboration—those early graduate collections with fractured typography and blood-spatter motifs. What he actually taught McQueen was how to prepare a screen, how to register layers, how to stop ink from bleeding through fine cloth. The technique mattered more than the aesthetic. McQueen used it for years, long after the friendship frayed.

At Givenchy, there was a workroom supervisor named Madame Vionnet—no relation to the couturier, though she had trained in the same tradition. She oversaw the flou atelier during McQueen's tenure and reportedly clashed with him over construction methods. He wanted corsetry that bit into the ribs. She insisted on a floating lining that allowed the body to breathe. The compromise shows up in the 1997 haute couture collection: boned bodices with an underlayer of silk crêpe de chine, cut on the bias. You can see it move independently in the runway footage.

When McQueen returned to London and expanded the Clerkenwell studio, he hired from three places: Savile Row (for structure), the Royal College of Art (for experimentation), and a small embroidery house in Shoreditch that has since closed. The embroiderers worked from his sketches, but they solved the engineering problems. A 2008 gown required 10,000 laser-cut leather feathers, each one attached by hand to a silk base. The sketch showed them overlapping like scales. The atelier head realised they needed to hang from individual threads to move correctly. She didn't ask. She just re-worked the pattern and showed him the result. He kept it.

The technique you don't notice

McQueen-trained cutters have a recognisable shoulder. It sits slightly forward, as if the body is leaning into the next step. The pitch comes from the way the sleeve is set—not at a right angle, but canted maybe five degrees ahead. You learn it by cutting muslin until the balance feels wrong in the opposite direction.

Judy Blame did metalwork for several collections in the late nineties. He is often credited as a stylist, which undersells what he actually contributed. For the Joan of Arc collection, he fabricated the chainmail bodices—real riveted rings, historically accurate gauge, worn directly against the skin. The models bled. McQueen kept the pieces in the show. Blame also made the antler headdresses, the razorwire corsets, and a series of chokers from Victorian mourning brooches reset in surgical steel. He worked in a garage in Dalston and billed by the piece, not the hour.

Simon Costin built some of the early stage sets. He had trained as a taxidermist and understood how to work with organic materials under heat and light. The ice block that melted around a model during the 1998 show was his engineering, not McQueen's concept. McQueen wanted her encased in glass. Costin pointed out that glass doesn't melt and offered ice as a structural alternative. They cast it in sections, reinforced with wire, and timed the lighting rig to accelerate the thaw. It worked once. The model was hypothermic by the end.

What Sarah Burton inherited

When Burton took over in 2010, she inherited a studio system, not a singular vision. McQueen had built an atelier structure that could survive him—senior cutters with decades of experience, embroiderers who knew the house techniques, patternmakers who could translate a sketch into something that moved on a body. She didn't have to rebuild. She had to decide what to keep.

The tailoring stayed. McQueen's suits had a specific cut—high armholes, a suppressed waist, trousers with a flat front and a darted back. Burton refined it but didn't soften it. The house still cuts a 13oz worsted with the same rake through the shoulder, the same clean skirt through the hip. It's one of the few things you can buy off the peg that feels like a bespoke commission.

The embroidery shifted. McQueen used beading as armour—dense, rigid, sometimes weaponised. Burton uses it as surface. Her gowns carry the same level of handwork, but they move differently. A 2019 dress required 120 hours of tambour beading, each stitch visible under magnification. The technique is identical to what the atelier used in 2004. The effect is lighter. That's a choice about thread weight and spacing, not skill.

She also kept the people. The head cutter who worked on Plato's Atlantis still runs the tailoring floor. The woman who engineered the oyster dress is now a senior patternmaker. A few have left for other houses—Dior, Schiaparelli, independent ateliers in Paris. But the core remains, and they still teach the McQueen shoulder to new apprentices the same way: by cutting it wrong until it looks right.

The archive problem

McQueen's work doesn't age well in storage. The materials were often unstable—raw silk that shatters, leather that cracks, metal that oxidises. The Costume Institute has several pieces they can no longer display because the structure has failed. A corset from 1996, made from reclaimed medical braces and canvas, collapsed under its own weight. The beading pulled through the base fabric. It now lives in a climate-controlled drawer, documented but unwearable.

The people who made those pieces know how to repair them. Some still work for the house. Others freelance and get called in when a museum needs a restoration. There is a woman in East London who re-wires the antler crowns when they tour. She learned the technique from Blame, who never wrote it down. If she retires without teaching someone, that knowledge leaves with her.

This is the gap in fashion preservation. We archive the garment, not the process. We credit the designer, not the cutter who made the pattern or the beader who solved the engineering problem. McQueen's name is on the label, and it should be—he drove the vision, set the standard, refused the easy version. But the work was never his alone.

The house continues because the hands that built it are still there, still cutting, still solving problems that don't appear in the press notes. A collection takes six months and involves thirty people whose names you won't see. They deserve more than a line in the credits. They deserve their own archive.

Lire et acheter · Alexander McQueen